--- 20031222-dmesg-noacpi Mon Dec 29 12:15:01 2003 +++ 20031222-dmesg-acpi Mon Dec 29 12:15:00 2003 @@ -3,14 +3,15 @@ The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #0: Mon Dec 29 10:56:39 EST 2003 rwatson@paprika:/usr/obj/usr/src/sys/GENERIC -Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a73000. -Preloaded elf module "/boot/kernel/snd_maestro3.ko" at 0xc0a731d8. -Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0a7328c. -Preloaded elf module "/boot/kernel/r128.ko" at 0xc0a73338. -Calibrating clock(s) ... i8254 clock: 1193304 Hz +Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ac5000. +Preloaded elf module "/boot/kernel/snd_maestro3.ko" at 0xc0ac51d8. +Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0ac528c. +Preloaded elf module "/boot/kernel/r128.ko" at 0xc0ac5338. +Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0ac53e4. +Calibrating clock(s) ... i8254 clock: 1193303 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 -Calibrating TSC clock ... TSC clock: 701593439 Hz +Calibrating TSC clock ... TSC clock: 701593941 Hz CPU: Intel Pentium III (701.59-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383f9ff @@ -19,7 +20,7 @@ 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c29000 - 0x000000001f6c5fff, 514445312 bytes (125597 pages) -avail memory = 511746048 (488 MB) +avail memory = 511737856 (488 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xc13e @@ -28,13 +29,14 @@ pnpbios: Event flag at 4b4 Other BIOS signatures found: wlan: <802.11 Link Layer> -null: random: mem: Pentium Pro MTRR support enabled +null: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface +acpi0: on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) @@ -57,8 +59,69 @@ embedded 0 17 B 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 17 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 17 D 0x62 3 4 5 6 7 9 10 11 12 14 15 -pcib0: at pcibus 0 on motherboard -pci0: on pcib0 +acpi_bus_number: root bus has no _BBN, assuming 0 +AcpiOsDerivePciId: bus 0 dev 7 func 0 +ACPI timer looks BAD min = 2, max = 5, width = 3 +ACPI timer looks BAD min = 2, max = 5, width = 3 +ACPI timer looks BAD min = 2, max = 5, width = 3 +ACPI timer looks BAD min = 2, max = 5, width = 3 +ACPI timer looks BAD min = 2, max = 5, width = 3 +ACPI timer looks BAD min = 2, max = 5, width = 3 +ACPI timer looks BAD min = 2, max = 5, width = 3 +ACPI timer looks BAD min = 2, max = 6, width = 4 +ACPI timer looks BAD min = 2, max = 5, width = 3 +ACPI timer looks BAD min = 2, max = 5, width = 3 +Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 +acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 +acpi_cpu0: on acpi0 +acpi_tz0: on acpi0 +acpi_acad0: on acpi0 +acpi_cmbat0: on acpi0 +acpi_cmbat1: on acpi0 +acpi_lid0: on acpi0 +acpi_button0: on acpi0 +acpi_button1: on acpi0 +pcib0: port 0xcf8-0xcff on acpi0 +---- initial configuration ------------------------ +\\_SB_.PCI0.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.7.0 +\\_SB_.PCI0.LNKB irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.7.1 +\\_SB_.PCI0.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.7.2 +\\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.7.3 +\\_SB_.PCI0.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.0 +\\_SB_.PCI0.LNKB irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.1 +\\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.3.0 +\\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.3.1 +\\_SB_.PCI0.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.0 +\\_SB_.PCI0.LNKB irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.8.0 +\\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.16.0 +\\_SB_.PCI0.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.16.1 +---- before setting priority for links ------------ +\\_SB_.PCI0.LNKC: + interrupts: 3 4 5 6 7 9 10 11 12 14 15 + penalty: 1330 1330 630 1330 1330 330 330 930 1330 10330 10330 + references: 3 + priority: 0 +---- before fixup boot-disabled links ------------- +\\_SB_.PCI0.LNKC: + interrupts: 3 4 5 6 7 9 10 11 12 14 15 + penalty: 1330 1330 630 1330 1330 330 330 930 1330 10330 10330 + references: 3 + priority: 8053 +---- after fixup boot-disabled links -------------- +---- arbitrated configuration --------------------- +\\_SB_.PCI0.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.7.0 +\\_SB_.PCI0.LNKB irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.7.1 +\\_SB_.PCI0.LNKC irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.7.2 +\\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.7.3 +\\_SB_.PCI0.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.0 +\\_SB_.PCI0.LNKB irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.1 +\\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.3.0 +\\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.3.1 +\\_SB_.PCI0.LNKC irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.0 +\\_SB_.PCI0.LNKB irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.8.0 +\\_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.16.0 +\\_SB_.PCI0.LNKC irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.16.1 +pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f4000000, size 26, enabled found-> vendor=0x8086, dev=0x7190, revid=0x03 @@ -71,23 +134,19 @@ class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x011f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns) -pci_cfgintr_valid: BIOS irq 11 is valid -pci_cfgintr: 0:3 INTA BIOS irq 11 found-> vendor=0x104c, dev=0xac51, revid=0x00 bus=0, slot=3, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 - cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) - lattimer=0x20 (960 ns), mingnt=0xc0 (48000 ns), maxlat=0x07 (1750 ns) - intpin=a, irq=11 + cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) + lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) + intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 -pci_cfgintr_valid: BIOS irq 11 is valid -pci_cfgintr: 0:3 INTA BIOS irq 11 found-> vendor=0x104c, dev=0xac51, revid=0x00 bus=0, slot=3, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 - cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) - lattimer=0x20 (960 ns), mingnt=0xc0 (48000 ns), maxlat=0x07 (1750 ns) - intpin=a, irq=11 + cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) + lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) + intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=7, func=0 @@ -101,8 +160,8 @@ cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000dce0, size 5, enabled -pci_cfgintr_valid: BIOS irq 11 is valid -pci_cfgintr: 0:7 INTD BIOS irq 11 +pcib0: matched entry for 0.7.INTD (source \\_SB_.PCI0.LNKD) +pcib0: slot 7 INTD is routed to irq 11 found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 @@ -117,8 +176,8 @@ lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000d800, size 8, enabled map[14]: type 1, range 32, base f3ffe000, size 13, enabled -pci_cfgintr_valid: BIOS irq 5 is valid -pci_cfgintr: 0:8 INTA BIOS irq 5 +pcib0: matched entry for 0.8.INTA (source \\_SB_.PCI0.LNKB) +pcib0: slot 8 INTA is routed to irq 5 found-> vendor=0x125d, dev=0x1998, revid=0x10 bus=0, slot=8, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 @@ -129,8 +188,8 @@ map[10]: type 4, range 32, base 0000d400, size 8, enabled map[14]: type 1, range 32, base f3ffdc00, size 7, enabled map[18]: type 1, range 32, base f3ffd800, size 7, enabled -pci_cfgintr_valid: BIOS irq 11 is valid -pci_cfgintr: 0:16 INTA BIOS irq 11 +pcib0: matched entry for 0.16.INTA (source \\_SB_.PCI0.LNKD) +pcib0: slot 16 INTA is routed to irq 11 found-> vendor=0x10b7, dev=0x6055, revid=0x10 bus=0, slot=16, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 @@ -141,8 +200,8 @@ map[10]: type 4, range 32, base 0000d000, size 8, enabled map[14]: type 1, range 32, base f3ffd400, size 8, enabled map[18]: type 1, range 32, base f3ffd000, size 7, enabled -pci_cfgintr_valid: BIOS irq 11 is valid -pci_cfgintr: 0:16 INTA BIOS irq 11 +pcib0: matched entry for 0.16.INTA (source \\_SB_.PCI0.LNKD) +pcib0: slot 16 INTA is routed to irq 11 found-> vendor=0x10b7, dev=0x1007, revid=0x10 bus=0, slot=16, func=1 class=07-80-00, hdrtype=0x00, mfdev=0 @@ -152,19 +211,26 @@ powerspec 2 supports D0 D2 D3 current D0 agp0: mem 0xf4000000-0xf7ffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 64M -pcib1: at device 1.0 on pci0 +pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xfd000000-0xfeffffff pcib1: prefetched decode 0xf8000000-0xfbffffff -pci1: on pcib1 +---- initial configuration ------------------------ +\\_SB_.PCI0.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.0.0 +---- before setting priority for links ------------ +---- before fixup boot-disabled links ------------- +---- after fixup boot-disabled links -------------- +---- arbitrated configuration --------------------- +\\_SB_.PCI0.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.0.0 +pci1: on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base f8000000, size 26, enabled map[14]: type 4, range 32, base 0000ec00, size 8, enabled map[18]: type 1, range 32, base fdffc000, size 14, enabled -pci_cfgintr_valid: BIOS irq 11 is valid -pci_cfgintr: 1:0 INTA BIOS irq 11 +pcib1: matched entry for 1.0.INTA (source \\_SB_.PCI0.LNKA) +pcib1: slot 0 INTA is routed to irq 11 found-> vendor=0x1002, dev=0x4c46, revid=0x02 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 @@ -175,42 +241,46 @@ drm0: port 0xec00-0xecff mem 0xfdffc000-0xfdffffff,0xf8000000-0xfbffffff irq 11 at device 0.0 on pci1 info: [drm] AGP at 0xf4000000 64MB info: [drm] Initialized r128 2.5.0 20030725 on minor 0 -cbb0: irq 11 at device 3.0 on pci0 +cbb0: at device 3.0 on pci0 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 +pcib0: matched entry for 0.3.INTA (source \\_SB_.PCI0.LNKD) +pcib0: slot 3 INTA is routed to irq 11 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac51104c 0x02100007 0x06070000 0x00822008 - 0x10: 0x88000000 0x020000a0 0x20000000 0xfffff000 + 0x10: 0x88000000 0x020000a0 0x20040400 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x00b11028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 - 0x80: 0x2024d024 0x00000000 0x00000000 0x01261222 - 0x90: 0x606482c0 0x00000000 0x00000000 0x00000000 + 0x80: 0x2024d025 0x00000000 0x00000000 0x01261222 + 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x0000081b 0x00000007 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 -cbb1: irq 11 at device 3.1 on pci0 +cbb1: at device 3.1 on pci0 cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 +pcib0: matched entry for 0.3.INTA (source \\_SB_.PCI0.LNKD) +pcib0: slot 3 INTA is routed to irq 11 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0xac51104c 0x02100007 0x06070000 0x00822008 - 0x10: 0x88001000 0x020000a0 0x20000000 0xfffff000 + 0x10: 0x88001000 0x020000a0 0x20050500 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x00b11028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 - 0x80: 0x2024f024 0x00000000 0x00000000 0x01261222 - 0x90: 0x606482c0 0x00000000 0x00000000 0x00000000 + 0x80: 0x2024f025 0x00000000 0x00000000 0x01261222 + 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x0000081b 0x00000007 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 @@ -224,7 +294,7 @@ atapci0: port 0x860-0x86f at device 7.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 -ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 +ata0-master: stat=0x82 err=0x82 lsb=0x82 msb=0x82 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 @@ -235,6 +305,15 @@ ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] +ata1: reset tp1 mask=03 ostat0=07 ostat1=07 +ata1-master: stat=0x06 err=0x06 lsb=0x06 msb=0x06 +ata1-master: stat=0x05 err=0x05 lsb=0x05 msb=0x05 +ata1-master: stat=0x04 err=0x04 lsb=0x04 msb=0x04 +ata1-master: stat=0x03 err=0x03 lsb=0x03 msb=0x03 +ata1-master: stat=0x02 err=0x02 lsb=0x02 msb=0x02 +ata1-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01 +ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00 +ata1: reset tp2 mask=03 stat0=01 stat1=00 devices=0x0 ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: port 0xdce0-0xdcff irq 11 at device 7.2 on pci0 @@ -242,17 +321,16 @@ usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered -piix0: port 0x840-0x84f at device 7.3 on pci0 -Timecounter "PIIX" frequency 3579545 Hz quality 0 +pci0: at device 7.3 (no driver attached) pcm0: port 0xd800-0xd8ff mem 0xf3ffe000-0xf3ffffff irq 5 at device 8.0 on pci0 pcm0: pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: Primary codec extended features AMAP -pcm0: sndbuf_setmap 21a000, 1000; 0xdca63000 -> 21a000 -pcm0: sndbuf_setmap 233000, 1000; 0xdca64000 -> 233000 -pcm0: sndbuf_setmap 234000, 1000; 0xdca65000 -> 234000 -pcm0: sndbuf_setmap 239000, 1000; 0xdca66000 -> 239000 -pcm0: sndbuf_setmap 23a000, 1000; 0xdca67000 -> 23a000 +pcm0: sndbuf_setmap 269000, 1000; 0xdca69000 -> 269000 +pcm0: sndbuf_setmap 26a000, 1000; 0xdca6a000 -> 26a000 +pcm0: sndbuf_setmap 26b000, 1000; 0xdca6b000 -> 26b000 +pcm0: sndbuf_setmap 289000, 1000; 0xdca6c000 -> 289000 +pcm0: sndbuf_setmap 28a000, 1000; 0xdca6d000 -> 28a000 xl0: <3Com 3c556 Fast Etherlink XL> port 0xd400-0xd4ff mem 0xf3ffd800-0xf3ffd87f,0xf3ffdc00-0xf3ffdc7f irq 11 at device 16.0 on pci0 xl0: using memory mapped I/O xl0: Ethernet address: 00:04:76:42:89:7b @@ -264,8 +342,35 @@ tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached pci0: at device 16.1 (no driver attached) +unknown: not probed (disabled) +psmcpnp0 irq 12 on acpi0 +atkbdc0: port 0x64,0x60 irq 1 on acpi0 +atkbd0: flags 0x1 irq 1 on atkbdc0 +atkbd: the current kbd controller command byte 0065 +atkbd: keyboard ID 0x41ab (2) +kbd0 at atkbd0 +kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 +psm0: current command byte:0065 +psm0: irq 12 on atkbdc0 +psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons +psm0: config:00000000, flags:00000000, packet size:3 +psm0: syncmask:c0, syncbits:00 +unknown: not probed (disabled) +unknown: not probed (disabled) +unknown: not probed (disabled) +unknown: not probed (disabled) +unknown: not probed (disabled) +unknown: not probed (disabled) +unknown: not probed (disabled) +unknown: not probed (disabled) +unknown: not probed (disabled) +unknown: not probed (disabled) +unknown: not probed (disabled) +unknown: not probed (disabled) +unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it +atkbdc: atkbdc0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 @@ -275,62 +380,6 @@ Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() -pnpbios: 15 devices, largest 248 bytes -PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x2 -pnpbios: handle 0 device ID PNP0a03 (030ad041) -PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 -PNP0c01: adding fixed memory32 range 0x100000-0x1fffffff, size=0x1ff00000 -PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000 -PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 -PNP0c01: adding io range 0x800-0x83f, size=0x40, align=0x1 -PNP0c01: adding io range 0x840-0x84f, size=0x10, align=0x1 -PNP0c01: adding io range 0x600-0x67f, size=0x80, align=0x1 -PNP0c01: adding io range 0x680-0x6ff, size=0x80, align=0x1 -PNP0c01: adding io range 0x880-0x88f, size=0x10, align=0x1 -PNP0c01: adding io range 0x3f0-0x3f1, size=0x2, align=0x1 -PNP0c01: adding io range 0xe0-0xe1, size=0x2, align=0x1 -pnpbios: handle 1 device ID PNP0c01 (010cd041) -PNP0c01: adding fixed memory32 range 0xed000000-0xedffffff, size=0x1000000 -PNP0c01: adding io range 0xf400-0xf4fe, size=0xff, align=0x1 -pnpbios: handle 2 device ID PNP0c01 (010cd041) -PNP0100: adding irq mask 0x1 -PNP0100: adding io range 0x40-0x5f, size=0x20, align=0x1 -pnpbios: handle 4 device ID PNP0100 (0001d041) -PNP0200: adding io range 0x80-0x9f, size=0x20, align=0x1 -PNP0200: adding io range 0-0x1f, size=0x20, align=0x1 -PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 -PNP0200: adding dma mask 0x10 -pnpbios: handle 5 device ID PNP0200 (0002d041) -PNP0303: adding irq mask 0x2 -PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 -PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 -pnpbios: handle 6 device ID PNP0303 (0303d041) -PNP0f13: adding irq mask 0x1000 -pnpbios: handle 7 device ID PNP0f13 (130fd041) -PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 -pnpbios: handle 8 device ID PNP0800 (0008d041) -PNP0b00: adding irq mask 0x100 -PNP0b00: adding io range 0x70-0x7f, size=0x10, align=0x1 -pnpbios: handle 9 device ID PNP0b00 (000bd041) -PNP0c04: adding irq mask 0x2000 -PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 -pnpbios: handle 10 device ID PNP0c04 (040cd041) -PNP0e03: adding irq mask 0x20 -PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0x1 -pnpbios: handle 11 device ID PNP0e03 (030ed041) -PNP0501: adding irq mask 0x10 -PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8 -pnpbios: handle 12 device ID PNP0501 (0105d041) -PNP0401: adding dma mask 0x8 -PNP0401: adding irq mask 0x80 -PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8 -PNP0401: adding io range 0x778-0x77b, size=0x4, align=0x8 -pnpbios: handle 14 device ID PNP0401 (0104d041) -PNP0700: adding irq mask 0x40 -PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0x2 -PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x8 -PNP0700: adding dma mask 0x4 -pnpbios: handle 15 device ID PNP0700 (0007d041) unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff @@ -346,17 +395,6 @@ adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) -atkbdc0: at port 0x64,0x60 on isa0 -atkbd0: flags 0x1 irq 1 on atkbdc0 -atkbd: the current kbd controller command byte 0065 -atkbd: keyboard ID 0x41ab (2) -kbd0 at atkbd0 -kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 -psm0: current command byte:0065 -psm0: irq 12 on atkbdc0 -psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons -psm0: config:00000000, flags:00000000, packet size:3 -psm0: syncmask:c0, syncbits:00 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) @@ -384,12 +422,12 @@ sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) -sio0: irq maps: 0x241 0x251 0x241 0x241 +sio0: irq maps: 0x141 0x151 0x141 0x141 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled -sio1: irq maps: 0x241 0x241 0x241 0x241 +sio1: irq maps: 0x141 0x141 0x141 0x141 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) @@ -418,33 +456,15 @@ 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices -adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330. Failing probe. -unknown: can't assign resources (port) -unknown: at port 0x3f0-0x3f1,0x880-0x88f,0x680-0x6ff,0x600-0x67f,0x840-0x84f,0x800-0x83f iomem 0xfffe0000-0xffffffff,0xf0000-0xfffff,0x100000-0x1fffffff,0-0x9ffff on isa0 -adv1: Invalid baseport of 0xf400 specified. Nearest valid baseport is 0x330. Failing probe. -adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe. -adv1: Invalid baseport of 0x80 specified. Nearest valid baseport is 0x100. Failing probe. -unknown: can't assign resources (port) -unknown: at port 0x60 on isa0 -unknown: can't assign resources (irq) -unknown: at irq 12 on isa0 -adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe. -unknown: failed to probe at port 0x61 on isa0 -adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Failing probe. -adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe. -unknown: can't assign resources (irq) -unknown: at port 0x3e0-0x3e1 irq 5 on isa0 -unknown: can't assign resources (port) -unknown: at port 0x3f8-0x3ff on isa0 -unknown: can't assign resources (port) -unknown: at port 0x378-0x37f on isa0 -unknown: can't assign resources (port) -unknown: at port 0x3f2-0x3f5 on isa0 Device configuration finished. procfs registered -Timecounter "TSC" frequency 701593439 Hz quality 800 +Timecounter "TSC" frequency 701593941 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached +acpi_acad0: acline initialization start +system power profile changed to 'economy' +acpi_acad0: Off Line +acpi_cmbat0: battery initialization start pccard1: CIS version PC Card Standard 5.0 pccard1: CIS info: NETGEAR MA401RA Wireless PC, Card, ISL37300P, Eval-RevA pccard1: Manufacturer code 0xb, product 0x7300 @@ -459,9 +479,14 @@ wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wi0: bpf attached ata0-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin +acpi_cmbat1: battery initialization start + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes ata0-master: setting PIO4 on Intel PIIX4 chip ata0-master: setting UDMA33 on Intel PIIX4 chip -GEOM: create disk ad0 dp=0xc484fc60 +GEOM: create disk ad0 dp=0xc4832e60 ad0: ATA-5 disk at ata0-master ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 @@ -479,23 +504,58 @@ GEOM: Configure ad0s1e, start 1589051392 length 18414797312 end 20003848703 Mounting root from ufs:/dev/ad0s1a start_init: trying /sbin/init -Stack trace for sysctl (pid 67) +Stack trace for sysctl (pid 72) #1 0x0804a1d0 #2 0x08048caf #3 0x08048a42 -Stack trace for sysctl (pid 67) +Stack trace for sysctl (pid 72) #1 0x0804a1d0 #2 0x08048caf #3 0x08048a42 -Stack trace for sysctl (pid 67) - #1 0x0804a1d0 (vnode 0xc4921618 /sbin/sysctl) - #2 0x08048caf (vnode 0xc4921618 /sbin/sysctl) - #3 0x08048a42 (vnode 0xc4921618 /sbin/sysctl) -Stack trace for sysctl (pid 67) - #1 0x0804a1d0 (vnode 0xc4921618 /sbin/sysctl) - #2 0x08048caf (vnode 0xc4921618 /sbin/sysctl) - #3 0x08048a42 (vnode 0xc4921618 /sbin/sysctl) +Stack trace for sysctl (pid 72) + #1 0x0804a1d0 (vnode 0xc494f618 /sbin/sysctl) + #2 0x08048caf (vnode 0xc494f618 /sbin/sysctl) + #3 0x08048a42 (vnode 0xc494f618 /sbin/sysctl) +Stack trace for sysctl (pid 72) + #1 0x0804a1d0 (vnode 0xc494f618 /sbin/sysctl) + #2 0x08048caf (vnode 0xc494f618 /sbin/sysctl) + #3 0x08048a42 (vnode 0xc494f618 /sbin/sysctl) Linux ELF exec handler installed linprocfs registered ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes WARNING: : multilabel flag on fs but no MAC support + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes + -0166: *** Error: UtAllocate: Attempt to allocate zero bytes +acpi_acad0: acline initialization done, tried 7 times +acpi_cmbat0: battery initialization failed, giving up +acpi_cmbat1: battery initialization failed, giving up